BTKFK - PHILLYCLAD 1000 SERIES HARDENER

  • MSDS: BTKFK
  • Manufacturer: ITW PHILADELPHIA RESINS CORP
  • Product Name: PHILLYCLAD 1000 SERIES HARDENER
  • National Stock Number: 8010-00F034776
Product Identification

Product ID:PHILLYCLAD 1000 SERIES HARDENER
MSDS Date:09/06/1991
FSC:8010
NIIN:00F034776
MSDS Number: BTKFK

Responsible Party
ITW PHILADELPHIA RESINS CORP
130 COMMERCE DR
MONTGOMERYVILLE, PA 18936
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-855-8450

Cage: ITWPH

Contractor
ITW PHILADELPHIA RESINS
454 MONTGOMERYVILLE, PA 18936 US

Telephone: 508-777-1100

Cage: ITWPH

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 10-30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


BISPHENOL A DIGLYCIDAL ETHER RESIN (DGBA EPOXY RESINS)

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: >60%


PROPYLENE GLYCOL MONOMETHYL ETHER

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9394


NAPHTHA, LIGHT AROMATIC

CAS: 64742-95-6

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM 9091

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION MAY CAUSE
RESPIRATORY IRRITATION, CNS EFFECTS. CONTACT MAY CAUSE SKIN AND EYE
IRRITATION. INGESTION MAY IRRITATE DIGESTIVE TRACT. CHRONIC:
PROLONGED OR REPEATED EXPOSURE MAY CAUSE SK IN SENSITIZATION AND
OTHER ALLERGIC RESPONSES; LIVER AND KIDNEY DISORDERS.
Explanation of Carcinogenicity:NO INGRDIENT OF A CONCENTRATION OF 0.1 %
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED: COUGHING, WHEEZING, SHORTNESS OF
BRETAH, NAUSEA, DIZZINESS. EYES: REDNESS, STINGING, TEARING,
DISCOMFORT. SKIN: REDNESS, SWELLING, DISCOMFORT. INGESTED:NAUSEA,
VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY DISORDERS.

First Aid

First Aid:INHALED: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF
BREATHING STOPPED; OXYGEN IF BREATHING DIFFICULT. GET MEDICAL
ATTENTION. EYES: FLUSH EYES WITH LOTS OF WATER FOR 15 MINUTES, HOLD
LIDS OPEN . GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHES. WASH WITH SOAP AND WATER. INGESTED: GET IMMEDIATE MEDICAL
ATTENTION.

Fire Fighting

Flash Point Method:TCC
Flash Point:80.0F,26.7C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, ALCOHOL FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE EQUIPMENT. COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE
EAR SOURCES OF IGNITION SUCH AS SPARKS, OPEN FLAME.

Accidental Release

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION.AVOID
PERSONAL CONTACT. ABSORB SPILL ON INERT MATERIAL. SHOVEL INTO
SUITABLE LABELLED CONTAINER FOR WASTE DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN AREAS DESIGNED TO COMPLY WITH
ANSI/NFPA 30 FLAMMABLE & COMBUSTIBLE LIQUIDS CODE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WHEN WORKING
IN CONFINED AREAS, OR IF VAPOR CONCENTRATION OF XYLENE EXCEEDS TLV.
Ventilation:USE ADEQUATE EXPLOSION-PROOF MECHANICAL VENTILATION OR
LOCAL EXHAUST TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:NITRILE
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
MSDS ENTERED BY DLA-HMIS PER PROJECT WITH AF-FP.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:248F,120C
Vapor Density:>1
Spec Gravity:1.04
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQUID WITH AROMATIC SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG MINERAL ACIDS, STRONG ALKALIS.
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OR FLAMES.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. RCRA/EPA WASTE NUMBER U239 (XYLENE) MAY APPLY.
CERCLA RQ= 100 POUNDS (XYLENE).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.